Agilent HP E3614A 252C 15A 252C16A 252C17A Operation free download

File name HP E3614A_252C 15A_252C16A_252C17A Operation.pdf

Agilent E361xA 60W BENCH SERIES DC POWER SUPPLIES OPERATING AND SERVICE MANUAL FOR MODELS: Agilent E3614A Agilent E3615A Agilent E3616A Agilent E3617A Manual Part No. 5959-5310 April 2000 Edition 8 1-1 SAFETY SUMMARY The following general safety precautions must be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability for the customer's failure to comply with these requirements. BEFORE APPLYING POWER. SAFETY SYMBOLS Verify that the product is set to match the available line voltage Instruction manual symbol; the product will and that the correct fuse is installed. be marked with this symbol when it is neces- GROUND THE INSTRUMENT. ! sary for the user to refer to the instruction manual. This product is a Safety Class I instrument (provided with a pro- tective earth terminal). To minimize shock hazard, the instrument chassis and cabinet must be connected to an electrical ground. or Indicate earth(ground) terminal. The instrument must be connected to the ac power supply mains through a three-conductor power cable, with the third wire firmly connected to an electrical ground(safety ground) at the power outlet. Any interruption of the protective(grounding) conductor or The WARNING sign denotes a hazard. It disconnection of the protective earth terminal will cause a poten- calls attention to a procedure, practice, WARNING or the like, which, if not correctly performed or tial shock hazard that could result in personal injury. If the instru- adhered to, could result inpersonal injury. Do ment is to be energized via an external autotransformer for not proceed beyond a WARNING sign until voltage reductio